جوتن اسٹوکو اور فلر

جوتن سرفیس فلرز اور پوٹی۔ پینٹ کرنے سے پہلے دراڑیں اور سوراخ ٹھیک کریں۔ راولپنڈی اور اسلام آباد میں حقیقی جوتن مصنوعات دستیاب ہیں۔

2 مصنوعات

Putty or block filler: getting walls ready for paint

Paint shows every dent and crack underneath it, especially silk and gloss finishes. Filling and smoothing the wall first is what makes a paint job look professional. We stock two genuine Jotun products for this, and they do different jobs.

Jotun Stucco Putty

Stucco Putty is a smooth filler for interior walls. It is used to fill small cracks, nail holes and uneven patches, and to level a wall before emulsion. It is applied thin with a putty knife or trowel, left to dry and then sanded smooth. For a very flat finish, painters often apply two thin coats rather than one thick one.

Jotun Block Filler

Block Filler is for rough, open and porous surfaces such as concrete blocks and coarse masonry. It fills the pores so that the finish paint does not soak in unevenly, and it gives a more even base. It is a common choice where the wall has not been fully plastered smooth.

Where filler fits in the system

The usual order on a wall is:

  • Clean the wall and remove loose paint or dust.
  • Apply a suitable Jotun primer.
  • Fill and level with putty or filler where needed, then sand.
  • Finish with two coats of paint, for example from our interior wall paint range.

Always check the product label, as the exact order and drying times can vary by product and surface. Deep structural cracks or damp patches need their cause fixed first. Putty will not cure a leak.

How much do you need?

Putty use depends heavily on how uneven the wall is, so it is hard to calculate exactly. Tell us the room size and send a photo, and we will suggest a sensible quantity. For the paint itself, our room calculator works out litres from wall size and coats.

Why buy from Paragon Interiors

We are an established local shop with an experienced team and good stock on hand. We sell genuine Jotun products and deliver with our own team in Rawalpindi and Islamabad. Wholesale rates are available for contractors.

Deewar ki tasveer bhejein, hum bata dein ge ke putty chahiye ya filler. Visit our shop opposite DHA Phase 2, Islamabad, or WhatsApp us at +92 334 5709400.

Common questions

What is the difference between Jotun Stucco Putty and Block Filler?

Stucco Putty is a smooth filler for levelling interior walls and filling small cracks. Block Filler is for rough, porous masonry such as concrete blocks, filling the pores before painting.

Do I apply putty before or after primer?

The usual order is primer, then putty or filler where needed, then two coats of finish paint. Check the label on the product, as some systems vary.

Can putty fix damp or leaking walls?

No. Putty only smooths the surface. Damp or leaks need the cause fixed first, otherwise the putty and paint will fail again.

What is the price of Jotun putty in Islamabad?

Retail prices are listed on each product page. The amount you need depends on how uneven your walls are, so send us a photo on WhatsApp for a quantity estimate.

Can you deliver putty to my site in Rawalpindi?

Yes, our own team delivers in Rawalpindi and Islamabad. Delivery starts at Rs 500, with bulk orders confirmed before payment.