PVC moulding: the finishing touch for walls and ceilings
Moulding is the shaped strip that runs along the edge of a wall, panel or ceiling. It hides rough cuts and gaps, and turns a plain wall into something that looks designed. PVC moulding is light, easy to cut and does not rot or attract termites like wood can. It can be painted or used in its own finish.
Common uses
- Framing PVC wall panels: a neat border around a TV wall or bed back wall. See our PVC panels.
- Wall frames on plain walls: square or rectangle frames that give a classic, paneled look without real panelling.
- Ceiling edges: a clean line where the wall meets a gypsum ceiling.
- Covering joints and ends: hides the cut edge where panels stop.
Our moulding
We stock PVC Moulding M-04 Classic Profile. It has a traditional shaped profile that suits both modern and classic rooms. It works well for wall frames in drawing rooms and bedrooms, and for finishing panel edges. Ask us to show you a piece against your panel or paint colour at the shop.
How to plan wall frames
Decide how many frames you want on each wall and sketch them with rough sizes. Keep the gap between frames equal, and leave the same margin at the top and bottom. Add the lengths of all sides together, then add a little extra for the cuts at each corner. If you are not sure, send us a photo of the wall with its width and height. We will suggest a layout and the length you need.
Deewar ki photo aur size WhatsApp karein, hum frame ka design aur moulding ki lambai bata dein ge.
Fitting and painting
Moulding is fixed with adhesive and pins, and corners are cut at an angle so they meet cleanly. If you plan to paint the moulding and the wall the same colour, see our Jotun range for genuine Jotun paints. Our own team fits moulding across Islamabad and Rawalpindi, often together with panels or ceilings. For a full room, book a home visit. There is a small visit fee, fully adjusted in your bill when you order.
Visit the shop
We are an established local shop with an experienced team and moulding in stock. Contractors can ask for wholesale rates on bulk lengths. Visit us at Al Hafeez Plaza, opposite DHA Phase 2, Islamabad, or WhatsApp +92 334 5709400. Hours are on the showroom page.
Common questions
What is the price of PVC moulding?
The price depends on how much length you need, so we give it on request. WhatsApp your wall sizes to +92 334 5709400 and we will work out the quantity and price.
Can PVC moulding be painted?
Yes, PVC moulding can be painted to match your wall. Ask us which paint suits it, or see our Jotun range.
How do I work out how much moulding I need?
Add up the length of every side of each frame or edge, then add a little extra for corner cuts. You can also send us a photo and the wall size and we will calculate it.
Is PVC moulding better than wooden moulding?
PVC is light, easy to cut and does not rot or attract termites, which makes it low maintenance. Wood gives a different feel but needs more care.
Do you fit moulding in Islamabad and Rawalpindi?
Yes. Our own team fits moulding in both cities, often along with panels or ceilings. Delivery starts at Rs 500, and larger orders may cost more, confirmed before payment.